Zanussi ZEI6840FBA Manual do utilizador - Página 10

Procurar online ou descarregar pdf Manual do utilizador para Hob Zanussi ZEI6840FBA. Zanussi ZEI6840FBA 20 páginas.
Também para Zanussi ZEI6840FBA: Manual do utilizador (20 páginas), Manual do utilizador (20 páginas)

Imprimir página

1. Installation

Problem

comes on.

comes on

and a number come on

comes on

If you tried the above solutions and cannot re-

pair the problem, speak to your dealer or the

customer service. Give the data from the rating

plate, three digit letter code for the glass ceram-

ic (it is in the corner of the glass surface) and an

error message that comes on.

Installation

Warning! Refer to the Safety chapters.

Before the installation

Before the installation of the appliance, record

the information below from the rating plate. The

rating plate is on the bottom of the appliance

casing.

• Model ...........................

• PNC .............................

• Serial number ....................

Possible cause

The Automatic Switch Off oper-

ates.

The Child Safety Device or the

Lock function operates.

No cookware is on the cooking

zone.

The cookware is incorrect.

The diameter of the bottom of the

cookware is too small for the

cooking zone.

There is an error in the appliance.

There is an error in the appliance,

because a cookware boils dry. The

protection against become too hot

for the cooking zone operates. The

Automatic Switch Off operates.

Make sure, you operated the appliance correct-

ly. If not the servicing by a customer service

technician or dealer will not be free of charge,

also during the warranty period. The instructions

about the customer service and conditions of

guarantee are in the guarantee booklet.

Built-in appliances

• Only use the built-in appliances after you as-

Connection cable

• The appliance is supplied with the connection

Deactivate the appliance and acti-

vate it again.

Refer to the chapter "Daily Use".

Put cookware on the cooking

zone.

Use the correct cookware.

Move cookware to a smaller cook-

ing zone.

Disconnect the appliance from the

electrical supply for some time.

Disconnect the fuse from the elec-

trical system of the house. Con-

nect it again. If

again, speak to the service centre.

Deactivate the appliance. Remove

the hot cookware. After, approxi-

mately 30 seconds activate the

cooking zone again.

go out of the display, residual heat

indicator can stay. Let the cook-

ware become sufficiently cool and

check it with the section Cook-

ware for the induction cooking

zone.

semble the appliance into correct built-in

units and work surfaces that align to the

standards.

cable.

Remedy

comes on

should