Blackberry RADAR H2 ITC100-1 Manual de instalação - Página 7

Procurar online ou descarregar pdf Manual de instalação para Radar Blackberry RADAR H2 ITC100-1. Blackberry RADAR H2 ITC100-1 30 páginas. Magnet accessory
Também para Blackberry RADAR H2 ITC100-1: Manual de instalação (33 páginas), Manual de instalação (28 páginas), Manual de instalação (35 páginas), Manual de instalação (25 páginas), Manual de instalação (35 páginas)

3. Once you have identified the desired mounting location for your asset, mark the

height where the device will be installed on the door of the trailer/container.

It is recommended that you install the module as level as possible on the asset. To

help ensure the device is level, you may try this technique.

Make one mark at the desired placement height.

•

Make a second mark, at the same height, approximately 4 inches (100mm) to

•

the side of the first mark.

Draw a straight line between the two points. This will help ensure your line is

•

parallel to the bottom of the door.

4. Remove the adhesive from the rear of the template and place the template in the

desired installation location. The adhesive at the back of the template ensures that it

stays on the door surface for accurate drilling of your holes.

BLACKBERRY RADAR H2 ITC100-1 INSTALLATION GUIDE 37