Directed Electronics 100 ESP Manual do Proprietário - Página 18
Procurar online ou descarregar pdf Manual do Proprietário para Alarme para automóvel Directed Electronics 100 ESP. Directed Electronics 100 ESP 20 páginas.
Imprimir página
All manuals and user guides at all-guides.com
QUICK REFERENCE GUIDE:
To arm/lock using your remote
Pressing
for one second will arm the system and lock the doors.
The red LED will begin to flash once per second. The Failsafe® Starter
Kill will prevent the vehicle's starter from cranking if it has been in-
stalled. The vehicle's horn (if connected) will honk and the parking
lights will flash once to confirm arming of the system.
To disarm/unlock using your remote
To disarm the system and unlock the doors, press
The Failsafe® Starter Kill will be deactivated and the vehicle's horn (if
connected) will honk twice and the parking lights will flash twice.
Disabling the Failsafe® Starter Kill without a transmitter
To do this, you must have the vehicle's ignition key and know where the
Valet® switch is. Be sure to check with the installer for the location of
the Valet® switch. Turn on the ignition. Press and release the Valet®
switch, within 10 seconds. The LED will stop flashing and the vehicle
should start.
To enter or exit Valet
®
Mode
Turn the ignition to the "on" position. Turn the ignition back off. Press
and release the Valet® switch within 10 seconds. The Status LED will
light steady if you have entered Valet® Mode. To exit Valet® Mode,
repeat the steps above. The LED will turn off when exiting Valet® Mode.
To activate panic mode
Press and hold
down for 1.5 seconds.
To exit panic mode
Press
.
14
for one second.
1999 Directed Electronics, Inc.
©