CTEK CHARGESTORM CONNECTED 2 Manual do utilizador - Página 8
Procurar online ou descarregar pdf Manual do utilizador para Carregador de bateria para automóvel CTEK CHARGESTORM CONNECTED 2. CTEK CHARGESTORM CONNECTED 2 19 páginas.
Também para CTEK CHARGESTORM CONNECTED 2: Manual do utilizador (20 páginas)
Imprimir página
5.
Make sure that the green connector symbol on
the front panel activates.
8
To change the configuration settings
NOTE: For most installations no change of the configuration is needed.
NOTE: CTEK E-Mobility recommends that the installation technician documents
the result of the configuration tests in the dedicated protocol.
1.
If the computer runs on Microsoft Windows, Download the CCU Drivers
from the webbsite. Follow the instructions given on the webbsite.
NOTE: For Linux, Android and Mac OSX, the USB driver is part of the operating
system.
2.
Connect the USB cable between the computer and the mini USB port on
the controller board.
3.
Open the web browser and log in to the local web interface at
http://192.168.7.2
The user name and password are both "ccu".
NOTE: CTEK E-Mobility recommends web browser Chrome for this action.
User & installation instructions
To configure the network interface (Ethernet)
2
1
5
1.
Navigate to Configuration>Interface>General and select WAN = Wire.
2.
Navigate to Configuration>Interface.
3.
Select Wire.
4.
Select DHCP or Static. If Static is selected, also enter IP address, netmask
and gateway.
5.
Press Save at the bottom of the page.
To configure WWAN (3G)
2
1
5
NOTE: WWAN is a specific 3G mode and is usually more robust than PPP.
1.
Navigate to Configuration.
2.
Select Interface.
3.
General and select WAN = modem (WWAN)
4.
Navigate to Configuration>Interface>WWAN and enter APN applicable for
the selected 3G operator. Leave remaining fields empty.
5.
Press Save at the bottom of the page.
3
4
3
4
CTEK E-Mobility AB