Clarke 3120181 Instruções de funcionamento e manutenção - Página 8

Procurar online ou descarregar pdf Instruções de funcionamento e manutenção para Serra Clarke 3120181. Clarke 3120181 17 páginas. Sabre saw

CONNECTING THE AIR LINE

1. Remove the protective plug from

the air inlet and connect a suitable

hose as shown.

2. A gauze filter is fitted within the air

inlet. Ensure this is always in place

and is kept clean. The air line is

connected to the adapter,

preferably via a quick release

coupling (not supplied).

3. Connect the other end of the hose

to the compressed air supply.

4. Ensure the trigger is NOT depressed when connecting the air line.

5. Turn on the air supply and check for air leaks. Rectify any found before

proceeding.

• PTFE tape may be useful for sealing threaded connections.

6. If required, connect an in-line mini oiler to the airline close to the air tool.

• A mini oiler helps to prolong the life of any air tool.

7. If a mini-oiler is not being used, run a few drops of oil through the air tool

before use. It can be entered through the airline inlet or via the hose at the

nearest connection to the air supply.

• Your sabre saw is now ready for use

• You can fit a whip hose with a quick fit coupling if required

(available from your Clarke dealer.)

USEFUL AIRLINE ITEMS FROM THE CLARKE RANGE

CAT150 Mini-Oiler:- Part No 3120164

8mm Rubber Whip Hose:-Part No 3120104

CAT58 6mm Recoil Hose with 1/4"bsp connectors (25 feet):-Part No 3110458

CAT59 6mm Recoil Hose with 1/4"bsp connectors (50 feet):-Part No 3110459

CRH9 9metres professional recoil hose:-Part No 3120100

CAR20PC Manual Air Hose Reel:-Part No 3126250

CAR15PC PVC hose in moulded case with auto re-wind:-Part No 3126000

See the latest catalogue for details of snap couplings & pressure gauges

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]