Clarke 6925117 Instruções de funcionamento e manutenção - Página 6
Procurar online ou descarregar pdf Instruções de funcionamento e manutenção para Aquecedor Clarke 6925117. Clarke 6925117 9 páginas. Multi-directional quartz halogen infra red heater
Imprimir página
OPERATION
Tools Required: 2 x 13mm spanners and 1 x
Pozidrive screwdriver (medium).
ASSEMBLY
To reduce the risk of transit damage, the
support legs (2), castors (4) and the halogen
lamps (2) are not fitted.
1.
Attach the four castors to the support legs
using the bolts, washers and nuts supplied.
Fig 1.
2.
Attach the legs to the main body using bolts
supplied. Fig 2
3.
Fit the four handles as shown in Fig 2 using
the 8 screws supplied.
4.
Insert the securing knobs into the rear of
each heating element.
Do not tighten them fully at this stage.
5.
Connect the mains cable to a suitable
supply.
USING THE HEATER
1.
Position the heater as required and lock the
wheels to prevent the heater from rolling.
2.
Release the locking clips and use the
handles on each side of the heater to rotate
the heating element to the required position.
3.
Tighten the securing knob on the back of the
heating element to lock in to place.
4.
Use the on/off switch to turn on the required
heating element.
Fig 1
Nut
Fig 2
Handle
Handle
Fig 3
On/Off Switch
(Top Element)
On/Off Switch
(Bottom Element)
6
Bolt and
Washer
Handle
Handle
Bolts and Washers