Clarke 3108005 Manual de Instruções de Operação e Manutenção - Página 5
Procurar online ou descarregar pdf Manual de Instruções de Operação e Manutenção para Ferramentas Clarke 3108005. Clarke 3108005 17 páginas. 3pc air tool kit
Imprimir página
SPRAY GUN OPERATION & USE
CAUTION: THE ITEMS IN THIS KIT HAVE A LOWER WORKING PRESSURE
THAN MANY COMPRESSORS WILL SUPPLY, THEREFORE, AN AIRLINE
REGULATOR SHOULD BE INSTALLED. SEE PAGE 4 FOR WORKING
PRESSURES.
CAUTION: AIRLINE LUBRICATORS SHOULD NOT BE USED WITH THESE ITEMS
This professional type gravity fed
spray gun is suitable for use with most
conventional paints. The spray gun is
fed with paint from the paint
container. The airflow through the air
cap draws paint into the nozzle
assembly, where it is atomised and
sprayed forward.
1. Operate this spray gun from an air
compressor capable of delivering
8 cfm.
2. Follow all safety precautions when attaching the spray gun to the air hose.
PREPARATION BEFORE PAINTING
1. Mix the paint to the correct viscosity for spraying according to the paint
manufacturers instructions and strain it into the paint container through a
fine mesh filter. When mixing the paint, make sure that you have enough
thinners left to clean the spray gun after use.
2. Do not fill the paint container to
more than 3/4 full. Make sure that
the top edge of the container
and lid are clean and free from
damage before mounting the
gun on the container. It is also very
important to keep the container
vent clear.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
5