CLAS OE 6047 Manual - Página 14

Procurar online ou descarregar pdf Manual para Ferramenta eléctrica CLAS OE 6047. CLAS OE 6047 16 páginas. Hot air gun 50-650 c

CLAS OE 6047 Manual
OE 6047
ACCESSOIRES
Description
Protective nozzle
Welding nozzle
Reduction nozzle
Re ective nozzle
Scraper
Warning
• Make sure that the tool is switched off and the nozzle has cooled down.
• Falling down nozzle can set an object on re. Nozzles must be mounted rmly and secure on the unit.
• Touching a hot nozzle can lead to serious burns. Before attaching or replacing a nozzle, allow the unit to cool
down completely or use a suitable tool.
• A hot nozzle can set a surface on re. Place down hot nozzles only on re-proof surfaces.
• An incorrect or defective nozzle can lead to heat accumulation and damage the unit. Use only original nozzles
according to the table that are suitable for your unit.
INSTRUCTIONS
• Always observe the safety instructions and applicable regulations.
• Use only one hand to hold the tool, do not place your other hand over the air vents
Prior to operation :
•Mount the correct accessory for the application.
•Set the desired air temperature
Switching on and off
• To switch the tool on, set the on/off switch to position 1/2. Some smoke may be emitted after switching on; this
does not indicate a problem.
• To switch the tool off, adjust the lowest temperature to cool off, then set the on/off switch to position 0. Let the
tool cool down before moving or storing it.
HOT AIR GUN 50-650°C
Purpose
Protection windows when stripping frames
Dying, thawing (heat spread over wider area)
Welding, shrink sleeving (heat concentrated over small area)
Soldering pipes
Stripping paint and varnish
clas-equipements.com