Lenovo IdeaCentre B300 Manual de substituição de hardware - Página 5
Procurar online ou descarregar pdf Manual de substituição de hardware para Interruptor Lenovo IdeaCentre B300. Lenovo IdeaCentre B300 23 páginas. Fc san switch
Também para Lenovo IdeaCentre B300: Aviso (4 páginas), Manual do produto (23 páginas)
Imprimir página
You can find the following information:
•
CRU removal and installation information
•
Publications
•
Troubleshooting information
•
Parts information
•
Links to other useful sources of information
To access this information, go to: http://consumersupport.lenovo.com.
Tools required
To disassemble the computer, you need the following tools:
•
Wrist grounding strap and conductive mat for preventing electrostatic
discharge
•
Flat screwdriver
•
Phillips screwdriver
•
Hex screwdriver
•
Plastic flat screwdriver
•
Plastic tweezers
Note: The screws for the different components vary in size. During the
disassembly procedure, group the screws with their corresponding
components to avoid a mismatch when replacing the components.
Handling static-sensitive devices
Static electricity, although harmless to you, can seriously damage computer
components.
When you are replacing a part, do not open the static-protective package
containing the new part until the defective part has been removed from the
computer and you are ready to install the new part.
When you handle parts and other computer components, take these precautions
to avoid static-electricity damage:
•
Limit your movement. Movement can cause static-electricity to build up around
you.
•
Always handle parts and other computer components carefully. Handle
adapters, memory modules, system boards, and microprocessors by the
Hardware Replacement Guide
31043502_B3_HRG_EN_V1.0.indd 2
2010.4.14 4:13:23 PM