Lenovo IdeaCentre B300 하드웨어 교체 매뉴얼 - 페이지 5
{카테고리_이름} Lenovo IdeaCentre B300에 대한 하드웨어 교체 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lenovo IdeaCentre B300 23 페이지. Fc san switch
Lenovo IdeaCentre B300에 대해서도 마찬가지입니다: 공지 사항 (4 페이지), 제품 설명서 (23 페이지)
페이지 인쇄
You can find the following information:
•
CRU removal and installation information
•
Publications
•
Troubleshooting information
•
Parts information
•
Links to other useful sources of information
To access this information, go to: http://consumersupport.lenovo.com.
Tools required
To disassemble the computer, you need the following tools:
•
Wrist grounding strap and conductive mat for preventing electrostatic
discharge
•
Flat screwdriver
•
Phillips screwdriver
•
Hex screwdriver
•
Plastic flat screwdriver
•
Plastic tweezers
Note: The screws for the different components vary in size. During the
disassembly procedure, group the screws with their corresponding
components to avoid a mismatch when replacing the components.
Handling static-sensitive devices
Static electricity, although harmless to you, can seriously damage computer
components.
When you are replacing a part, do not open the static-protective package
containing the new part until the defective part has been removed from the
computer and you are ready to install the new part.
When you handle parts and other computer components, take these precautions
to avoid static-electricity damage:
•
Limit your movement. Movement can cause static-electricity to build up around
you.
•
Always handle parts and other computer components carefully. Handle
adapters, memory modules, system boards, and microprocessors by the
Hardware Replacement Guide
31043502_B3_HRG_EN_V1.0.indd 2
2010.4.14 4:13:23 PM