Acorn Computers Limited A3020 Manual de instruções de instalação - Página 4
Procurar online ou descarregar pdf Manual de instruções de instalação para Unidade de controlo Acorn Computers Limited A3020. Acorn Computers Limited A3020 8 páginas. Econet module
Imprimir páginaFitting the kit
The Econet module PCB should be positioned as shown in
Fitting
the Econet module:
Make sure that
•
the pins of PL1 on the Econet module are aligned with the
corresponding holes in socket SK13 on the main PCB
•
the pins of PL2 on the Econet module are aligned with holes 11
to 15 in socket SK l6 on the main PCB.
Note that the remaining holes of
When you are satisfied that all the pins are correctly aligned, press
the Econet module PCB gently into place.
Take care not to exert too much pressure when pressing home the
Econet module PCB; this may lead to damage of the various connectors.
Figure 1:
Fitting the Econet module
SK16 are not
socket
Figure
1:
used.
1
1