Acorn Computers Limited A3020 Kurulum Talimatları Kılavuzu - Sayfa 4

Kontrol Ünitesi Acorn Computers Limited A3020 için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Acorn Computers Limited A3020 8 sayfaları. Econet module

Sayfayı Yazdır

Fitting the kit

The Econet module PCB should be positioned as shown in

Fitting

the Econet module:

Make sure that

•

the pins of PL1 on the Econet module are aligned with the

corresponding holes in socket SK13 on the main PCB

•

the pins of PL2 on the Econet module are aligned with holes 11

to 15 in socket SK l6 on the main PCB.

Note that the remaining holes of

When you are satisfied that all the pins are correctly aligned, press

the Econet module PCB gently into place.

Take care not to exert too much pressure when pressing home the

Econet module PCB; this may lead to damage of the various connectors.

Figure 1:

Fitting the Econet module

SK16 are not

socket

Figure

used.