DISCOVER LYNK Edge Card Victron Manual do utilizador - Página 6
Procurar online ou descarregar pdf Manual do utilizador para Acessórios para câmaras DISCOVER LYNK Edge Card Victron. DISCOVER LYNK Edge Card Victron 9 páginas. Lithium ion battery
Imprimir página4.2 VE.Direct MPPT Settings
During normal operation the MPPT charge characteristics are governed by the CCGX via DVCC, with instructions from the
connected AES battery.
The settings below are precautionary. This section presumes familiarity with VictronConnect (Bluetooth App) used to
configure, monitor and diagnose Victron MPPT products which feature Blue-tooth, or are equipped with a VE.Direct Port.
MPPT Charge Controller Settings
Battery voltage
Max current per battery installed
(Recommended < Maximum)
Charger enabled
Battery preset
Absorption voltage
Maximum absorption time
Float voltage
Equalization voltage
Auto equalization
Temperature compensation
Low temperature cut off
(9) May be set to lower value if necessitated by charger controller size.
(10) Duration of absorption period after the bulk charge interval. The recommended minimum is 1.0 hour. A longer
period of time may be required to compensate for multiple batteries to achieve a smooth completion of charge.
5. Installing LYNK and Connecting LYNK to the Victron Network
5.1 Installing the LYNK Edge Card
The LYNK Edge Card for Victron is a Slot 0 Type which only inserts into the left side slot on the bottom of the LYNK
Communication Gateway.
•
The LYNK Edge Card type to be used is determine by the brand of power
conversion equipment.
•
If LYNK Edge Card is in the wrong slot, it will not function.
•
If LYNK Edge Card is not firmly seated, it will not function.
6
(9)
(10)
Slot 0 Type
▲ NOTE
44-24-2800
42-48-6650
24 V
48 V
installed x
installed x
(78 A < 110 A)
(92 A < 130 A)
Enabled
Enabled
User Defined
User Defined
27.2 V
54.8 V
1.0 < 3.0 Hr
1.0 < 3.0 Hr
26.8 V
54.0 V
26.8 V
54.0 V
Disabled
Disabled
Copper compression lug
Copper compression lug
Disabled
Disabled
5
C
5
0
Shrink-wrap to
Shrink-wrap to
color-code the cable
color-code the cable
Terminal surface
Terminal surface
M8" bolt (supplied with battery)
M8" bolt (supplied with battery)
Lock washer (supplied with battery)
Lock washer (supplied with battery)
C
0
Flat washer (supplied with battery)
Flat washer (supplied with battery)
Battery cable lug
Battery cable lug
Ensure nothing is between
Ensure nothing is between
the terminal surface and the
the terminal surface and the
battery cable lug
battery cable lug
discoverbattery.com