3D Hobby Shop 70 AJ SLICK Manual de montagem - Página 10

Procurar online ou descarregar pdf Manual de montagem para Brinquedo 3D Hobby Shop 70 AJ SLICK. 3D Hobby Shop 70 AJ SLICK 19 páginas.

Use a lock nut to tighten the ball link into the rudder control horn. Assemble the cables

onto the pull-wire ends, pulling the cables snug before crimping. We do not need the cables

to be extremely tight, just snug and without sagging. Use the threaded pull-cable ends,

screwing them into the ball joints as necessary, to tighten the cables.

Remove the covering over the wing spar tube hole, the wing bolt hole, and the other holes

in the front of the fuselage as shown.

Remove covering over the horizontal stabilizer opening. Insert horizontal stabilizer – DO

NOT GLUE YET. Temporarily install the wings onto the fuselage.