Aroma Professional AEM-810 Manual de instruções - Página 6
Procurar online ou descarregar pdf Manual de instruções para Máquina de café Aroma Professional AEM-810. Aroma Professional AEM-810 12 páginas.
Imprimir página
Before First Use
1. Read all instructions and important safeguards.
2. Remove all packing materials and make sure that
the product has been received in good condition.
3. Take care to keep the electrical components on
the exterior of the espresso machine dry. Wipe the
exterior of the espresso maker with a damp cloth.
4. Remove the Water Reservoir and wash with
warm, soapy water. Rinse and dry thoroughly
before returning to the espresso machine.
5. Wash all other accessories including the Drip
Tray, Portafilter, and Cups as well, again making
sure to rinse and dry thoroughly.
6. Fill the Water Reservoir between the minimum
and maximum line.
To Clean
1. Wipe the exterior of the espresso maker with a
damp cloth, taking care to avoid the electrical
components.
2. Remove the Drip Tray and drain, if needed.
Return to the espresso machine.
3. Wash the Portafilter and removable shot
cup with warm soapy water. Rinse and dry
completely.
4. Allow Steam Wand to cool completely for a few
minutes. Remove plastic tube to wipe down metal
Steam Wand with a damp cloth. Wash the plastic
tube with warm soapy water. Dry completely.
Return tube to wand for next use.
Troubleshooting
The espresso machine and power switch
light do not work when powered on.
· Make sure the espresso machine is connected to a
functioning electrical outlet.
The espresso machine won't start brew-
ing.
· The thermoblock heater is not hot enough yet. Wait
until the Brew Key light remains constantly on.
6.
Caution:
Always unplug the
espresso maker
and allow it to cool
completely before
cleaning.
Never attempt to
disassemble the
espresso machine.
Never immerse the
espresso machine,
power cord or plug in
water.
Always take care not
to allow electrical
components to come
into contact with water.
Do not use abrasive
cleaners or scouring
pads of any kind on
the espresso machine.
This will cause damage
to the finish and may
create a risk of electrical
shock.
Note:
· Any other servicing
should be performed by
Aroma® Housewares.