Aroma Professional AEM-810 Manual de instruções - Página 8

Procurar online ou descarregar pdf Manual de instruções para Máquina de café Aroma Professional AEM-810. Aroma Professional AEM-810 12 páginas.

Brewing Espresso

1. Plug the espresso machine into an available 120V

AC wall outlet.

2. Turn the Power Switch to the ON position.

3. Press the Brew Key. It will blink red while it heats.

4. While the espresso machine is heating, put the

desired size Shot Cup into the Portafilter. Press

firmly into place.

5. Use the scoop to fill the shot cup with fine coffee

grounds. Use the tamper side of the Scoop to

compress the coffee grounds. Scrape off any

overfill.

6. Insert the Portafilter into the espresso machine

and twist right until secure.

7. Place your coffee cup under the Portafilter spout.

8. When the Brew Key is a solid red, the espresso

machine is ready to brew.

9. Turn the Control Knob to BREW. Espresso will

begin brewing. Once you have the desired

amount, or the water stream becomes less dark

and clear, turn the knob back to O.

10. Remove your cup. Twist the Portafilter to the left

and carefully remove. Discard the used coffee

grounds, then clean according to Cleaning

Instructions page 6.

11. Turn off the espresso machine when finished.

1. Flllow steps 1-3 in Brewing Espresso page 8.

2. Place your mug underneath the Steam Wand.

3. When the Brew Key is solid red, the espresso

machine is ready to make hot water. NOTE: the

green Steam Key should NOT be pressed; make

sure it is not illuminated.

4. Turn the Control Knob to STEAM. Hot water will

begin pouring from the Steam Wand.

5. When desired amount of hot water has been

reached, turn the Control Knob back to O.

6. Turn the espresso machine off when finished.

Caution:

Be careful when using

the Steam Wand for hot

water to avoid burns

from spraying.