Aroma360 HOTEL SCENTS MUSEUM360 Manual de início rápido - Página 2
Procurar online ou descarregar pdf Manual de início rápido para Acessórios Aroma360 HOTEL SCENTS MUSEUM360. Aroma360 HOTEL SCENTS MUSEUM360 2 páginas.
Imprimir página
Adding Your Hotel Scents Oil
1
Be certain the di user is unplugged or powered o before proceeding.
Unscrew the aluminum oil bottle from the atomizer.
2
You will see an oil pipette a ixed to a nozzle. Pour your Aroma360 oil into the
provided aluminum bottle. Then, screw in the aluminum bottle until it is
tightly secured.
• Do not overfill the bottle.
• Only Hotel Scents oils should be used in the Museum360; using any other
oils may damage the unit and will void the warranty.
3
Screw in the fragrance bottle to the atomizer. Ensure it is inserted tightly and
straight otherwise, the oil will leak. Once the fragrance bottle is secured, you
may turn on or plug in the di user
4
When changing scenting oils, remove any oils in the bottle inside first. (You
may dispose of it or pour it back into the original bottle). Pour some rubbing
alcohol into the aluminum bottle, about ¼ full. Di use the rubbing alcohol for
about 15-30 minutes.
5
Remove any additional rubbing alcohol, rinse and dry the bottle as best as
possible before pouring in the new fragrance oil.
Tips for Using Your Museum360
•
Di using rubbing alcohol every three months helps maintain the di user and
prevent oil from clogging your system.
•
Please ensure the Museum360 and atomizers are always kept in the upright
position, away from any kind of moisture and extreme temperatures, and also
out of reach of children.
•
Always make sure the unit is either powered o or unplugged before adding
or removing the oil canister.
•
Always remove oil when transporting the unit.
•
To remove the thick or thin tubing from the atomizer or di user, simply press
down on the black outer portion of the tube connector and the tubing will
release as the black outer ring is a "release" button.
Technical Specifications
Unit Dimension
14 ¾ x 7 x 9 ½ (inches) | 37.46 x 17.78 x 24.13 (cm)
Voltage
110v
Power
50 watts or 2.2 amps
Noise Level
< 56dba
Unit Weight
19.6 lbs. (8.89 kgs)
Coverage
6,000 sq. ft. 557m2)
Color
Black
dispersion
HVAC Only
Troubleshooting
PROBLEM
REASON
No LCD Indication
Power is not getting to the unit or the unit is turned
o .
Plug in the unit and press the silver button that is
SOLUTION
on the lower side part of the Museum360.
No Mist/Scent
Make sure the unit is plugged in.
Check the LCD display. If it says "OFF", the unit is not
set to be working at that time. If the unit says "PAUSE"
it's on the pause portion of the interval.
Oil could be out.
Ensure the power is connected and adjust the
SOLUTION
event times and days so that the unit is set to
"ON". Also check the oil canister to make sure
there is oil in the bottle.
Low Mist/Scent
The nozzle may be clogged.
Run with rubbing alcohol for 3 minutes or change
SOLUTION
the nozzle.
Oil Leakage
Ensure the Museum360 is a full upright position.
Remove the fragrance bottle and reattach
SOLUTION
making sure it is screwed in straightly and is
very tight.
Buttons are not
The unit's settings may be locked.
working
Hold down the "SET" button for 10 seconds until
SOLUTION
you hear a beep. The sound will indicate "lock
mode" has been disabled.
C O N T A C T I N F O R M A T I O N :
( 3 0 5 ) 5 4 9 - 5 4 1 3
Custome r S e r v ic e@Hote ls c ent s .c om
W WW.HOT EL S C EN T S .C O M
T h e
M U S E U M
Welcome to the world of Hotel Scents scenting!
With your Hotel Scents scent di user, you'll be able to create a beautifully
scented ambiance in a few simple steps.
Through the advanced technology of Cold-Air Di usion, your discreet
and sleek Hotel Scents di user is a convenient and practical solution to
enhance any space you desire.