3D Systems Cubify CUBEX Duo Manual de substituição - Página 8
Procurar online ou descarregar pdf Manual de substituição para Impressoras 3D 3D Systems Cubify CUBEX Duo. 3D Systems Cubify CUBEX Duo 13 páginas. Replacing a main board pcb
Também para 3D Systems Cubify CUBEX Duo: Manual de substituição (17 páginas), Manual (10 páginas), Manual (10 páginas)
Imprimir página
2. Place the Print Jet onto the Print Jet carriage plate as pictured, note the
locating standoff and corresponding hole present on the Print Jet
3. Ensure that the wires from the Print tip are orientated to travel straight up to
the Sensor board
4. Replace the M3 x 20 bolt into the hole as pictured and fasten. This must be
tight.
8