3D Systems ProJet 5500X Manual de início rápido - Página 11
Procurar online ou descarregar pdf Manual de início rápido para Impressoras 3D 3D Systems ProJet 5500X. 3D Systems ProJet 5500X 13 páginas.
8/11/22, 10:07 AM
Place the platform in a freezer for ten to fteen minutes. As the parts and platform cool, they
contract at different rates and separate.
Alternatively, the parts can be mechanically separated from the build platform by force using a
tool with a stiff thin blade such as a putty knife. Make certain you do not mark the platform.
For more information on how to clean parts, refer to the VisiJet Material Handling Guide.
Empty Waste Drawers
Personal protection equipment is required before opening waste drawer. Follow all material
handling and disposal guidelines. Always follow Global Health and Safety guidelines and
local regulations regarding handling and disposal of regulated materials. Keep disposal
records if local law requires.
CAUTION: Wear protective gloves before removing any waste material. Be careful not to
spill, drop, or expose others to these materials. Dispose the material according to your local
regulatory guidelines.
NOTE: When removing the draped portion of the bag, be careful not to spill the
material that may be on the top portion of the bag.
1. Open the upper left and upper right MDMs.
2. Slide both waste drawers completely out of the printer.
3. Remove
waste bags
4.
Replace
the plastic
5. Close waste drawers and press the
Standby and Conserve Mode
infocenter.3dsystems.com/projetmjp5500x/print/book/export/html/966
from waste drawers and place into a hazardous waste container.
waste bag
for each drawer.
Start
to resume.
Quick Start Guide
11/13