Abbott IonicRF RF-POLE Manual de instruções de utilização - Página 10
Procurar online ou descarregar pdf Manual de instruções de utilização para Racks & Stands Abbott IonicRF RF-POLE. Abbott IonicRF RF-POLE 20 páginas. Generator pole mount
Imprimir páginaFigure 4. Tightening the cap-head screws
3.
Using the screwdriver included in the kit, tighten the cap-head
screws, alternating between the two, until the pole mount
clamp base is firmly attached to the clamp cap.
WARNING: Ensure the pole mount is securely fastened to
the pole before attaching the generator. Failing to secure
the pole mount may cause the product to fall, resulting in
product damage or injury.
Step 2: Remove the Countertop Stand
NOTE: The IonicRF™ Generator is supplied with an attached
countertop stand. Before attaching the pole mount to the
generator, the countertop stand must be removed. Always
place the generator on a level surface when adding or
removing the countertop stand.
1. Top of pole mount
clamp placed
1.2 cm to 5.1 cm
(0.5 in to 2 in)
below the bottom
edge of the black
pole cap
6