Acoustic Energy AEG05/P5 Manual do Proprietário - Página 15
Procurar online ou descarregar pdf Manual do Proprietário para Altifalantes Acoustic Energy AEG05/P5. Acoustic Energy AEG05/P5 16 páginas. Powered 5.1 surround sound speaker system
Imprimir página
AEGOp5 Operation
- Saving Presets
Setting Presets
The AEGO
5 enables you to customise
P
up to 4 settings. This function enables
you to save and load your favourite
settings at any time.
Saving a Preset:
Press the PRESET 1 button, the display
will show the following:
DOLBY DIGITAL CO
PRESET 1
Press the SAVE button to save all the
current decoder settings into Preset 1.
DOLBY DIGITAL CO
PRESET 1 SAVING
DOLBY DIGITAL CO
PRESET 1 SAVED
When complete, your AEGO
5 will revert back to Auto Decode mode.
P
DOLBY DIGITAL CO
AEGOp5 Operation
- Loading Preset
Loading a Preset
You can load a previously saved preset
by pressing LOAD button on the
remote.
Loading a Preset:
Press any of the 4 preset buttons,
(PRESET 1, PRESET 2, PRESET 3 or
PRESET 4), the display will show
the following:
DOLBY DIGITAL CO
PRESET 1
Press LOAD button to load the preset.
DOLBY DIGITAL CO
PRESET 1 LOADING
DOLBY DIGITAL CO
PRESET 1 LOADED
When preset loading is complete, your AEGO
Auto Decode mode.
DOLBY DIGITAL CO
AEGOp5 Operation
input
power
mute
test
balance
delay
prologic
field
EQ on/off
EQ setup
preset 1
preset 2
preset 3
save1
preset 4
load
BassManager
Cen
SL/SR
SW
VOL
D Time
DRC
input
power
mute
test
balance
delay
prologic
field
EQ on/off
EQ setup
preset 1
preset 2
preset 3
save1
preset 4
load
BassManager
Cen
SL/SR
SW
VOL
D Time
DRC
5 will revert back to
P
14
AEGOp5 Operation
- Sound Field Processing
DSP Sound Field
Your AEGO
5 is equipped with a sound
P
field processor that gives you six
different field effects; Disable, Hall,
Theatre, Stadium, Club, and Church. By
pressing Field button on the remote,
you can select any of these effects. You
can also increase or decrease the
Reverb value from 0 - 9 by pressing
VOL + or VOL - on the remote control
whilst you are selecting the field effect.
Press the Field button and repeat to
change the current setting of Sound Field mode.
DOLBY DIGITAL CO
DIABLE
REVERB 0
DOLBY DIGITAL CO
HALL
REVERB 3
DOLBY DIGITAL CO
THEATRE REVERB 3
DOLBY DIGITAL CO
STADIUM REVERB 3
DOLBY DIGITAL CO
CLUB
REVERB 3
DOLBY DIGITAL CO
CHURCH
REVERB 3
AEGOp5 Operation
- Equalization
5-Band Equalization
Your AEGO
5 features a 5-band equalizer
P
which enables you to fine tune the sound
of your favourite movie or music. Press
EQ SETUP button on the remote to
activate it. Repeatedly pressing EQ SETUP
button will switch between the 5 bands.
Each band of the equalizer enables you to
adjust your desired volume to a maximum
of ±10dB. Press VOL + or VOL - on the
remote control to adjust the volume.
After setting the desired volume for each
EQ band, you
press EQ SETUP button again to store the
new setting for that band.
Press EQ ON/OFF button to switch the new EQ settings on or off.
input
power
mute
test
balance
delay
prologic
field
EQ on/off
EQ setup
preset 1
preset 2
preset 3
save1
preset 4
load
BassManager
Cen
SL/SR
SW
VOL
D Time
input
power
mute
test
balance
delay
prologic
field
EQ on/off
EQ setup
preset 1
preset 2
preset 3
save1
preset 4
load
BassManager
Cen
SL/SR
SW
VOL
D Time
DRC
reset