abc STARGUIDE III Manual de resolução de problemas
Procurar online ou descarregar pdf Manual de resolução de problemas para Recetor abc STARGUIDE III. abc STARGUIDE III 7 páginas.
Imprimir páginaABC STARGUIDE III SATELLITE RECEIVER
Starguide III Receiver
Featutues of the Starguide III satellite receiver:
• L-Band input (950 MHz – 1450 MHz). A Phase Lock Loop (PLL) LNB (Low Noise Block
Downconverter) is required for nominal operation. A "digital-ready" LNB is not the same
thing and may provide sub-standand performance.
• Six (6) "ports" are available on the back for any number of available expansion cards
• Standard ABC News Affiliate Package: two (2) audio decoders, one (1) relay card, and one
(1) Netcue/Data card.
• Standard ABC 24-hr Format Affiliate Package: two (2) audio decoders, one (1) relay card
Receiver Condition
NORMAL
UNABLE TO FIND
ANY ABC SERVICES
ON STARGUIDE
CARRIER
Page 1 of 7
TROUBLESHOOTING GUIDE
Indicators
Green SIGNAL, SYNC and
POWER LEDs illuminated.
LCD display reads:
STARGUIDE III
EB XX.X AG XXX
(where X = numerical value)
Green SIGNAL, SYNC and
POWER LEDs illuminated.
LCD display reads:
STARGUIDE III
EB XX.X AG XXX
(where X = numerical value)
Under CARRIER MENU, carrier
name listed as NSN, ViretX,
Westwood East, OneOnOne.
Cause/Resolution
N/A
Receiver not set for ABC frequency
and data rate.
Tune receiver to ABC Starguide
carrier from CARRIER MENU.
AMC-8: FREQ: 0990000 kHz
RATE: 12288000BPS
VIT:
2/3
NOTE: Receiver must have software
version 2.16 or higher in order to
tune to the ABC Starguide carrier on
AMC-8.
4/16/2002