abc STARGUIDE III Manual de resolução de problemas - Página 7

Procurar online ou descarregar pdf Manual de resolução de problemas para Recetor abc STARGUIDE III. abc STARGUIDE III 7 páginas.

Netcue Data Card
The Starguide system also utilizes ABC NetCue. NetCue data in transmitted along with ABC
Data on its own 64 kb/s data channel. This data channel is located under the ABC NEWS
provider and is called NETCUE/DATA.
1. All 16 relays are on the NetCue/Data card, no external Netcue Box is required.
2. NetCue relays can be programmed over the satellite link.
Netcue Card Condition Cause/Resolution
CARD NOT
WORKING. NO LED
ACTIVITY ON CARD
UNABLE TO SET
CARD TYPE TO
ETHERNET
NO RELAYS OR
DATA OUTPUT
Page 7 of 7
Receiver port not properly configured.
Start at top level menu. Press <Enter> on the Starguide keypad:
Press ? until you get to PORT MENU, press <Enter>
Press ? until you get to desired receiver port with Netcue Card, press <Enter>
Press ? until you get to CARD TYPE, press <Enter>
Press ? until you get to Ethernet Card, press <Enter>
NOTE: If this Starguide III receiver also has an EDAS card, then you may
need to set CARD TYPE to EDAS)
Press ? to select YES to confirm, then press <Enter>
Press ? until you get to PROVIDER, press <Enter>
Press ? until you get to ABC NEWS, press <Enter>
Press ? until you get to SERVICE, press <Enter>
Press ? until the NETCUE/DATA is displayed, press <Enter>
There is another Ethernet-type card (Ethernet or eDAS) configured incorrectly
in the receiver.
Configure other Ethernet-type card to proper settings.
Incorrect PROVIDER and/or SERVICE settings.
Follow the above instructions to set PROVIDER to ABC NEWS and
SERVICE to NETCUE/DATA.
4/16/2002