Alto AltoDrive2.3 Manual do utilizador - Página 11
Procurar online ou descarregar pdf Manual do utilizador para Crossover Alto AltoDrive2.3. Alto AltoDrive2.3 20 páginas. Crossover digitale 2 way stereo digital x over
Também para Alto AltoDrive2.3: Manual do utilizador (19 páginas)
Imprimir página
This graphic screen shows the frequency response of the channel.
Use Up/Down/Left/Right keys to select one of the five fields: Page Number, Filter Number, Gain, Frequency, Band-
width. The selected value can be changed by means of the dial. The selected filter's frequency will be shown by a
vertical segment on the display (see above).
When a filter parameter is modified, the audio signal is processed real-time, while the picture on the display waits
briefly to update. During this waiting time, an asterisk is shown in the upper right corner of the window, until the
graphic is processed.
To access the following screen select page number and press Enter, to get back press Esc.
DLY. A
DLY. F
VOL.
DLY. A
DLY. F
VOL.
Use Up/Down/Left/Right keys to select one of the four fields: Page Number, Volume, Delay Fine, Delay Adjust; the
selected value can be changed by means of the dial. To access the precedent screen select page number and press
Esc.
c. OUT 1 / 2 / 3 / 4
Here output channels can be configured:
EDIT PARAMETRIC FILTERS (page 1 of 4)
000 ms
0000 us
0.00 dB
000 ms
0000 us
0.00 dB
10
DLY. A
000 ms
DLY. F
0000 us
VOL.
0.00 dB
DLY. A
000 ms
DLY. F
0000 us
VOL.
0.00 dB