Alto AltoDrive2.3 Manual do utilizador - Página 13
Procurar online ou descarregar pdf Manual do utilizador para Crossover Alto AltoDrive2.3. Alto AltoDrive2.3 20 páginas. Crossover digitale 2 way stereo digital x over
Também para Alto AltoDrive2.3: Manual do utilizador (19 páginas)
Imprimir página
Use Up/Down/Left/Right keys to select one of the five fields: Page Number, Polarity, Limiter Threshold, Limiter
Release, Limiter Attack; the selected values can be changed by means of the dial.
To access the precedent page select page number and press Esc.
When the current preset has been edited, it is necessary to save this preset by means of the STORE function,
otherwise whatever preset loading or power cycle of the system will overwrite and erase completely the edited
data.
Up/Down/Right/Left key: These keys are used to navigate the menus and to modify the parameter values.
Enter/Esc key: These keys are used to access or to leave the menus, or to confirm the parameter values.
Edit key: This key allows the user to enter the edit menu (the related LED will light)
When entered the edit menu, the user will be able to access and modify all the parameters related to the process,
when the user modifies one parameter value, the LED starts to blink to signal the update. The LED will blink until
the storing of the new modified preset in one of the 64 available locations.
Vu-meter: This function allows the user to use the vu-meter to show the input signal level.
Mute keys:
LTO DRIVE has 4 mute keys.(each channel has one mute key).
Press the mute key, the related channel is muted.
5.APPLICATION ILLUSTRATION
5.1
LTO DRIVE 2.3 2-Way Input, 4- Way Output (High, Mid, Low, Sub MIXED MONO)
If you want to present your
connect your system as the following illustration step by step:
1.Set the input /output path as the following
2.Plug the left line-in into INPUT1 and the right line-in into INPUT2
3.Set OUTPUT1, OUTPUT2, OUTPUT3, OUTPUT4 as high mid low subfrequency band OUT separately.
4.Connect the OUTPUT1 to the high frequency amplifier, OUTPUT2 to the mid frequency amplifier, OUTPUT3 to
the low frequency amplifier, OUTPUT4 to the sub frequency amplifier.
POL.
DIR
THR.
00 dB
REL.
0.4 S
ATK.
0.05 S
POL.
DIR
THR.
00 dB
REL.
0.4 S
ATK.
0.05 S
POL.
DIR
THR.
00 dB
REL.
0.4 S
ATK.
0.05 S
LTO DRIVE 2.3 in a 2-way input, 4-way output (high, mid, low, sub application, please
connection
POL.
THR.
REL.
ATK.
POL.
THR.
REL.
ATK.
:
12
DIR
00 dB
0.4 S
0.05 S
DIR
00 dB
0.4 S
0.05 S