Balt 27508 Manual de instruções de montagem - Página 4
Procurar online ou descarregar pdf Manual de instruções de montagem para Mobiliário de interior Balt 27508. Balt 27508 7 páginas. Floor lectern
Imprimir página
Do not use unless all screws are tight. At least every six months, check all screws
to be sure they are tight. If parts are missing, broken, damaged, or worn, stop use
of the product until repairs are made by your dealer using factory authorized parts.
Place the Back Panel (P-4) with the
8.
Pre-drilled holes facing up and install 6
each Cam Locks (C) in the 6 large holes
as shown in illustration # 3.
Attach Right Metal Bracket
9.
(P-7R) to Back Panel (P-4) using
2 Screws (A1) as shown
in illustration # 3.
C
Illustration # 4
H
J
Illustration # 5
H
J
P-4
C
P-9
C
P-3
Illustration # 3
C
Be sure that arrow on
top of Camlock (C)
aligns with centerline of
Edge Drilled hole.
Centerline of
Edge Drilled
hole.
Place the Middle Shelf (P-9) with the
10.
Pre-drilled holes facing up and install 4
each Cam Locks (C) in the 4 large holes as
shown in illustration # 4.
11.
Insert 1 Grommet Sleeve (H) in Round
opening in Middle Shelf (P-9) as shown in
illustration #4.
12.
Snap Grommet Cap (J) into Grommet
Sleeve (H) as shown in illustration #4.
13.
Locate Bottom Shelf (P-3) and Insert 1
Grommet Sleeve (H) in round opening as
shown in illustration #5.
14.
Snap Grommet Cap (J) into Grommet
Sleeve (H) .
4
P-7R
A1
Phillips
Screwdriver
Arrow
P-1