esera automation 11319 Manual do utilizador
Procurar online ou descarregar pdf Manual do utilizador para Controlador esera automation 11319. esera automation 11319 9 páginas. 1-wire controller 1 ethernet w/auto-e-connect
Também para esera automation 11319: Instruções de utilização (4 páginas)
Imprimir página
Art No 11319
1-Wire Controller for autonomous
communication and updating of the 1-Wire
network
Fast readout of all 1-Wire devices in the
1-2 seconds cycle
Cyclic output of the prepared 1-Wire data in
plain text
Operation without additional driver
Data logging in case of communication
interruption to the control system//host system
(optional)
Power supply for 1-Wire Network
Designed for small up to large 1-Wire Networks
Top-hat rail housing for control cabinet
installation
Wide supply voltage range
Management of all ESERA-Automation
and many standard 1-Wire modules
1
Introduction
Before you start assembling the 1-Wire Controller 1 and before you take the device into operation, please read
these assembly and operating instructions carefully to the end, especially the section referring to the safety notes.
2
Product description
Independent management
The 1-Wire Controller is designed for the independent management of a 1-Wire network. You no longer have to
worry about the 1-Wire commands or formulas in order to evaluate sensor data. The controller independently scans
the 1-Wire network for components (sensors and actuators) and will, depending on the found component, provide
the respective data output, readily converted in plain text.
Formatted data output
The 1-Wire Controller ensures the cyclical output of readily processed sensor and actuator data, for instance for
temperature sensors in C°. Only a division by 100 is necessary.
Additionally, the article number for ESERA-Modules can be supplied, the calculation and the output occur adjusted
to the function of the module.
Designed for all 1-Wire Networks
The 1-Wire interface of the controller is specially designed to safely handle 1 Wire networks, from small ones up to
very large ones, with long cable sections. 1-Wire sensors can simultaneously be operated, miscellaneously, in
parasitic or normal mode. The currently most powerful 1 Wire interface was used, in order to ensure maximal data
safety for complex network structures as well.
All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of
ESERA GmbH. Errors and technical modification subject to change. ESERA GmbH, ESERA-Automation 2020
www.esera.de
User Guide
1-Wire Controller 1 Ethernet
11319 V3.0 R1.0 Manual
Page 1 of 9