esera automation 11319 Manual do utilizador - Página 2
Procurar online ou descarregar pdf Manual do utilizador para Controlador esera automation 11319. esera automation 11319 9 páginas. 1-wire controller 1 ethernet w/auto-e-connect
Também para esera automation 11319: Instruções de utilização (4 páginas)
Imprimir página
System time / real time clock
You do not have a real-time clock with battery buffering in your system? No problem, the 1-Wire Controller 1 will
gladly provide the time with date. The real-time clock (RTC) is supplied by a maintenance-free Gold cap (super
capacitor) for approx. 2 days in case of power failure.
What is a Goldcap (super capacitor)? You can find an explanation here:
https://de.wikipedia.org/wiki/Superkondensator.
Power supply
In order to supply power, the 1-Wire Controller has a wide range input of 9 - 30VDC and is thus equally suitable
for 12V power supplies and for typical industrial 24VDC power supplies.
You can find appropriate DIN rail or plug-in power supplies in our webshop.
Commissioning
How to Videos for commissioning and configuration can be found on our website
Service and Support, Support Videos.
Note: Basic information and tips on the 1-Wire Bus System can be found in the ESERA Online Shop at
1-Wire basics or please refer to our eBook in the shop under Training/Documentation
3
Auto-E-Connect® Support
The ESERA Auto-E-Connect® 1-Wire Plug and Play system will be used for the
1-Wire Bus supported. This enables fully automatic configurations of 1-Wire sensors
and actuators on the 1-Wire bus. It is optimized for industrial applications and
enables significant added value beyond the sensor and chip data.
The Auto-E-Connect function automatically recognizes ESERA chips, sensors and actuators, starts suitable
libraries and outputs fully formatted data.
The Auto-E-Connect functionality will be available from mid-2020 via 1-Wire Controllers, 1-Wire Gateways and
1-Wire ECO from ESERA available.
Further information on ESERA Auto-E-Connect can be found on the ESERA website, ESERA Config-Tool 3, or in
the download area for this article in the ESERA Webshop.
4
Technical data
Ethernet Interface:
Firmware Update/
Configuration:
Power supply:
Power consumption:
Power supply RTC:
1-Wire interface:
Protective circuits:
Connection:
Output voltage:
Isolation:
Supported
1-Wire devices:
5
Ambient conditions
Temperature, operation -10°C up to +55°C
Air humidity:
Protection system:
Protection class:
Measurements:
All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of
ESERA GmbH. Errors and technical modification subject to change. ESERA GmbH, ESERA-Automation 2020
www.esera.de
TCP/IP oder UDP
- 10/100 MBit Ethernet Interface (RJ45)
- Auto Negotiation (Full-duplex and Half-duplex)
- Auto MDI/MDIX
- Support for DHCP or fix IP-Adress
ESERA Config Tool III
9-30VDC
maximally 500 mA
Goldcap, buffering of the internal clock (RTC) for approx. 2 days if the supply voltage
fails. In case of a longer failure the RTC has to be reset.The Coldcap is charged after
approx. 2 hours.
1-Wire Bus (5V, GND and data)
ESD protection and reverse polarity protection
Screw terminals (up to 2,5qmm wire cross section)
5V (+/-10%), maximally 200 mA, overload-proof and short-circuit-proof
Galvanic separation between data and 1-Wire interface
DS2401, DS1963, DS1990, DS1820, DS18S20, DS18B20, DS2413, DS2438, DS2450
DS2408, DS2405, DS2406 (only input), DS2423, further chips on request.
We are happy to support further devices as OEM product for you.
10 - 92% (non-condensing)
IP20
III
35 x 90 x 70mm (WxHxD)
11319 V3.0 R1.0 Manual
www.esera.de
under
Page 2 of 9