esera automation 11124 Manual do utilizador

Procurar online ou descarregar pdf Manual do utilizador para Adaptador esera automation 11124. esera automation 11124 3 páginas. For 1-wire cable temperature sensors

Art. No. 11124
Performance characteristics
Modular socket (RJ45) on terminals
Easy connection via screwless push-in terminal
No removal of the network connector from the
preconfigured cables
Support capacitor for 5V voltage
Assignment of the RJ45 socket conform
1-Wire.org, ESERA and IP-Symcon
1
Introduction
Before you begin installing and operating the adapter, please read this manual carefully until the end, especially
the section on safety instructions.
2
Product description
The 1-Wire Adapter 2 is designed for easy adaptation of CAT network cables to screw terminals. This makes it
easy to connect individual wires to ready-made CAT network cables without removing the network connectors.
The 1-Wire Adapter 2 together with our 1-Wire Hub RJ45 and our 1-Wire sensors with RJ45 sockets form a
coordinated system.
Using the 1-Wire Adapter 2, all our modules without RJ45 sockets can be easily integrated into 1-Wire systems
based on CAT network cables.
3
Technical data
Connection:
Supply voltage:
Other:
Temperature,Operation: 0°C bis +50°C
Air humitidy:
Protection class:
Protection system:
Dimensions:
All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of
ESERA GmbH. Errors and technical modification subject to change. ESERA GmbH, ESERA-Automation 2020
www.esera.de
User guide
1-Wire Adapter 2
for 1-Wire cable Temperature sensors
- RJ45 socket for CAT 5-7 network cable
- Push-in terminal (screwless) for 1-wire network (Data, 5V 12V and GND)
up to 1,5qmm cable cross section
5V, 12VDC und GND
Support capacitor between +5V and GND (0.1µF)
10 - 92% (non condensing)
III
IP00
37 x 32 x 25 mm
11124 V1.0 R1.1 Manual
Page 1 of 3