3DUpFitters Prusa i3 MK2 Manual de instalação - Página 10

Procurar online ou descarregar pdf Manual de instalação para Invólucro 3DUpFitters Prusa i3 MK2. 3DUpFitters Prusa i3 MK2 11 páginas. Enclosure kit
Também para 3DUpFitters Prusa i3 MK2: Manual de instalação (18 páginas)

much tolerance in the placement of
the off/on switch and power cable
plug, so you'll have to get it pretty
close. This will make it easier to turn
off and on and provide the best seal
so that heat won't escape.

7. Spool Holder

Instructions for assembling the spool holder are available online. You can simply sit the
spool holder on the top of the enclosure where the filament can fit into the slit. Of
course, you are free to use whatever type of freestanding spool holder you wish; there
are hundreds of designs available on Thingiverse.
8. Thermometer
The optional thermometer will let you know
approximately what temperature it is inside
the enclosure. It attaches to the left side of
the door piece using the same hole as the
top-most corner connector as shown. It
comes with a longer screw to fit through
everything.
Copyright 2018 3DUPfitters
10