Alto-Shaam 1000-UPS/EPL Instalação, operação e manutenção - Página 9
Procurar online ou descarregar pdf Instalação, operação e manutenção para Equipamento comercial para alimentos Alto-Shaam 1000-UPS/EPL. Alto-Shaam 1000-UPS/EPL 20 páginas. Electric food holding cabinet
Imprimir página
E l e c t r o n i c C o n t r o l
Timer Programming Information
1. Turn On/Off Power Key OFF.
Press the
/
ON
OFF KEY
OFF (at least 2 seconds).
Note: The following steps can only be
done when the
2. Set Shelf Timer Keys.
Press and hold a
2 seconds) until a value is shown in the
LED
. Use the
DISPLAY
to change the time desired.
3. Set Additional Timer Keys.
Repeat step 2 for each
to be programmed.
4. Turn On/Off Power Key ON.
When selected timers have been programmed,
press the
/
ON
OFF KEY
5. Press Shelf Timer Key.
Press selected
SHELF TIMER KEYS
Shelf LED
DISPLAY
count down will begin.
The
LED with the least amount of time
SHELF TIMER KEY
remaining will flash slowly and the LED
alternate between hold temperature and time
remaining.
until the display turns
/
is OFF.
ON
OFF KEY
(at least
SHELF TIMER KEY
UP OR DOWN ARROW KEY
SHELF TIMER KEY
to turn ON unit.
to activate.
will illuminate and the
DISPLAY
I N STA L L A T I O N / O P E R A T I O N / SE RV I C E M A N U A L • 9.
O P E R AT I O N
The Multiple Shelf Timer Key feature is
exclusively available for the electronic control. These
keys monitor food safety by using a timer-based
"First-In, First-Out" product management system.
Products should be cooked to HACCP
recommended internal temperature and then held in
the unit. The Timer system allows operator to select
holding times when the unit is loaded. Multiple timer
keys correspond to various pan locations in the
holding unit. As the timers expire, audible alarms
notify the operator.
6. Turn OFF alarm.
Listen for beeping alarm. Press flashing
SHELF TIMER KEY
Reprogram Shelf Timer Keys
If you wish to reprogram holding times, turn OFF
power. Press the desired
new time using
ON and press each
count downs.
Important Note: Timer Station Key retains initial
Power Failure: If a power failure occurs while the
will
to turn OFF alarm.
TIMER SHELF KEY
UP OR DOWN ARROW KEY
to start the
SHELF TIMER KEY
time settings in memory.
Count down times are cancelled
when
/
ON
OFF KEY
It may help to note any remaining
count down times before
reprogramming.
unit is running, you will not be
able to change the control
temperature. Simply depress the
/
to resolve. The timer
ON
OFF KEY
memory will not be impaired.
and input
. Turn unit
is turned OFF.