ClearOne WS840D-M610 Manual de início rápido - Página 5
Procurar online ou descarregar pdf Manual de início rápido para Sistema de microfone ClearOne WS840D-M610. ClearOne WS840D-M610 13 páginas.
Imprimir página
Receiver:
FRONT PANEL:
ClearOne receiver main-frames hold either four or eight, independent, 24-bit digital audio receiver modules.
There is a front-panel mixed audio output for headphones or direct recording. Each module shares the main-
frame's two antennas for full-diversity. Receiver main-frames can be daisy-chained together allowing up to
32 channels in an antenna network that shares two antennas. This eliminates the need for external antenna
distribution amps. Main-frames can be connected to form an Ethernet network that monitor and control the
system via a computer. Main-frames also have USB and RS232 connections for serial monitor and control.
1
1. Antenna Front Mounting Hole: Use back-to-front TNC cables included.
2. Receiver Module (See details below).
3. Mixed audio volume control.
4. USB Port. Connect to computer for ClearOne Remote control. Run software to monitor/edit system
parameters, scan for RF interference and download firmware upgrades.
5. Mixed audio output, 1/4" (See headphone mode - Pg. 3) phone jack for monitoring individual channels
or mixed channels.
6. Power Switch.
Receiver Module:
MODULE:
Modules are designed for quick and easy field replacement for added redundancy.
1
BATTERY
SLOT 3
CH 1
FUNCTION
2
5
2
2
1
IR
SELECT
2
AUDIO
ON
AES256
(SYNC)
STATUS
4
3
1
IR Sync LED: Sends IR information to SYNC the receiver and transmitter (SYNC pg5).
&
Pressed at the same time: Sends SYNC signal from receiver to transmitter (SYNC pg5).
4
3
Status LED:
• Green --> The channel is ON and un-muted
• Red --> The channel is OFF
• Flashing Red --> Encryption key mismatch or, two transmitters are synced
• Amber --> The receiver is muted or GPIO is triggered
RF BARS
ANTENNA DIVERSITY
AUDIO LEVEL
BATTERY LEVEL
CHANNEL NAME
ENCRYPTION
STATUS:
FREQUENCY
to the same Receiver. Solution: Re-sync receiver with transmitter.
(Colored text indicates status)
ON = Green
OFF = Red
MUTE = Amber
KEY = Flashing Red ("KEY" = mismatched encryption key)
3
4
5
6