Alto-Shaam 1000-MR1 Manual de utilização e cuidados - Página 6
Procurar online ou descarregar pdf Manual de utilização e cuidados para Frigorífico Alto-Shaam 1000-MR1. Alto-Shaam 1000-MR1 14 páginas. Mobile refrigerated cart
Também para Alto-Shaam 1000-MR1: Ficha de especificações (2 páginas), Instalação, operação e manutenção (17 páginas)
6.6 DOOR HANDLE REPLACEMENT
NOTE:
It may be necessary to remove the
handle assembly in order to get the
cabinet through a door opening.
1. Remove the three side mounting screws in latch.
2. Remove two screws in strike.
3. Replace in reverse order.
6.7 DOOR GASKET REPLACEMENT
NOTE:
It is suggested that the door be
removed from the cabinet and placed
face down on a work table.
1. Remove the fasteners and pull old gasket
from the retainer.
2. Clean gasket retainer and immediate area.
3. Start new gasket into retainer. After gasket
is positioned, replace fasteners.
NOTE: Avoid cutting the gasket if possible.
6.8 DOOR HINGE REPLACEMENT
This procedure will require two people.
NOTE:
One person to hold the door while the
other removes the attachment screws.
S C H E D U L E D M A I N T E N A N C E
6.8 POWER SWITCH REPLACEMENT
SWITCH THE CONTROL PANEL POWER
TO THE "OFF" POSITION AND
DISCONNECT THE POWER SUPPLY
CORD BEFORE SERVICING.
Operation and Care Manual #8410/11 • 5
1. Using a screwdriver, remove the three screws
which attach the butt section of the hinges to
the cabinet.
2. With the door detached from the cabinet,
remove the screws which attach the second
part of the hinge to the door.
3. To install the replacement hinge, reverse the
process.
1. Disconnect the unit from the power source.
2. Remove the silicone seal around the
perimeter of the front control leader panel.
Remove the panel by lifting straight up.
3. Using a flat blade screwdriver, remove the
cover plate with switch attached.
4. Remove the wires connected to the switch.
5. Unscrew the lock washer and remove the
switch.
6. Reverse the process to install the new
switch.
7. Remount panel and reseal with silicone.