ClearWater ELEGANCE EL20 Instruções de montagem e lista de peças - Página 3

Procurar online ou descarregar pdf Instruções de montagem e lista de peças para Produto de canalização ClearWater ELEGANCE EL20. ClearWater ELEGANCE EL20 3 páginas.

Imprimir página

Figure 1

Figure 3

Figure 5

Replace the aerator

Figure 2

Figure 4

Before installation, please confirm whether the flexible hose (ster0033) is tightened, and

tighten it completely by hand. (Figure 1)

Pass the flexible hoses and threaded stud through the sink top from above and place the

mixer in position on the sink. (Figure 2)

(Make sure that sealing washer has been fitted to the mixer body.)

Slide the flat washer and fixing nut up the flexible hoses, and then screw the nut all the way

up making sure the tap is in the correct position. (Figure 3)

(Note:The thickness of sink＞35mm no need to use the mounting seat.)

Connect the Check valve marked Ster0107 to the cold tail.（Figure 4）

Having first checked all new connections, turn on the mains stop cock, close all taps

except the new mixer and as the system starts to refill check for leaks.

If you feel that the flow rate is too low during use, you can unscrew the upper section of the

smart aerator (Ster0226) counterclockwise to remove the smart aerator and replace the

regular aerator (Ster0225). (Figure 5)