ClearWater Lights Darla Manual de instalação - Página 9
Procurar online ou descarregar pdf Manual de instalação para Acessórios para motociclos ClearWater Lights Darla. ClearWater Lights Darla 12 páginas. Led light kit for bmw k1600gt
Também para ClearWater Lights Darla: Manual de instalação (12 páginas), Manual de instalação (12 páginas), Manual de instalação (12 páginas), Manual de instalação (16 páginas)
Imprimir página
Finishing the Install
Note: Bike engine must be running for lights to work.
To finish the install of your Clearwater Lights, verify that all wires are routed
away from pinch points, steering stops and direct contact with heat sources.
Insert the fuse into the fuse holder and start the engine to activate the
Clearwater Lights. Reference the CANopener manual for programmability
and functionality of the lights. Make sure that all functions such as high
beam, horn, and dimming modes work as expected.
Once the system is confirmed working, reassemble the bike including the
fairings, turn signal connector and seat. You can now level the lights to
minimize unneccessary glare to oncoming traffic.
Aligning the Lights:
Ask an assistant to help you with this
procedure. Make sure the bike is on
level ground and have an assistant sit
on the bike. With a right angle board
or object, position the board on the
floor and slide it up to the light.
The goal is to adjust the lights so that
the light is level with the ground.
Do Not Kink The
Grommet
To maintain the
integrity of the water
sealling grommet,
do not kink, deform
or put pressure on
the grommet when
dressing the wires
during install of
Clearwater Lights.
Do Not Kink The Grommet
Page 8