dji Phantom FC40 Manual de iniciação

Procurar online ou descarregar pdf Manual de iniciação para Quadricópteros dji Phantom FC40. dji Phantom FC40 11 páginas.

DJI Phantom 1 & FC40 setup – Getting Started Guide

Note – the following is for new users or buyers of the Phantom FC40 or Phantom 1 models.

These models can be identiﬁed by the single round LED on the quadcopter read and the

battery compartment door on the front. The FC40 includes a camera while the plain Phantom

1 comes with a GoPro holder.

Have you recently acquired a Phantom FC40 or Phantom 1? The Holiday season often ends

with the unboxing of thousands of new Quadcopters!

If so – and if you have limited experience with the DJI Phantoms and advanced Quadcopters –

please read and understand the following before taking to the air.

Before taking your Phantom outside to ﬂy!

Read the manual at least twice. You can download the newest electronic version at:

http://www.dji.com/product/phantom-fc40/download

Basic Deﬁnitions:

NAZA – the ﬂight controller box (F/C) inside your Phantom which contains the hardware and

software which makes your quadcopter work.

NAZA Assistant – the software, windows or mac, which allows you to upgrade, test and

change various settings on your Phantom.

Transmitter or TX – the remote control (usually a white box with two "sticks") which you use

to control your Phantom.

S1 and S2 (called X1 and X2 in the Assistant program!) – the switches on the upper right (S1)

and left (S2) of your TX. These set the "modes" which the Phantom responds to and can be

programmed in the NAZA assistant software.