dji FC7BMC Manual do utilizador - Página 7
Procurar online ou descarregar pdf Manual do utilizador para Acessórios para drones e quadricópteros dji FC7BMC. dji FC7BMC 16 páginas. Motion controller
Imprimir página
Operation
Powering On/Off
Press the power button once to check the current battery level. Recharge before using if the battery level is too low.
Press once then press again and hold to power the motion controller on or off.
LED1
LED2
Charging
Use a USB-C cable to connect a charger to the USB-C port of
the motion controller. It takes approximately 2.5 hours to fully
charge the motion controller.
The table below shows the battery level during charging.
LED1
LED2
7
© 2021 DJI All Rights Reserved.
The battery level LEDs display the power level of the battery during
charging and discharging. The statuses of the LEDs are defined below:
LED is on.
LED is flashing.
LED is off.
LED3
LED4
LED3
LED4
Battery Level
Battery Level > 80%
75% < Battery Level ≤ 80%
63% < Battery Level ≤ 75%
50% < Battery Level ≤ 63%
38% < Battery Level ≤ 50%
15% < Battery Level ≤ 38%
8% < Battery Level ≤ 15%
0% < Battery Level ≤ 8%
5V, 1A
Battery Level
0% < Battery Level ≤ 50%
50% < Battery Level ≤ 75%
75% < Battery Level < 100%
Fully charged