djpower FLAME MACHINE HF-210 Manual do utilizador - Página 8

Procurar online ou descarregar pdf Manual do utilizador para Equipamento de DJ djpower FLAME MACHINE HF-210. djpower FLAME MACHINE HF-210 16 páginas.

Imprimir página

Error and Warning

Page

5.3.3.

Menu Map Setup

Press MENU to enter the setting interface. Press MENU to enter different options until you return to the main interface.

5.4.

Operation

5.4.1.

Orientation

Please read the safety distance print on the top panel of the FLAMER carefully.

Tip switch

WindowLight

Angle Selection

Full Angle

language

English

E1: Pressure Err

P:0 V：12

E2: Tip Err

P:0 V：12

E3: Bat Err

P:0 V：12

E4: System Lock

P:0 V：12

E5: Relief Err

P:0 V：12

Setting the tilt protection

(In case it is ON, if the machine tilts over 45° , it

stops the unit from firing)

Setting LED light which illuminates the fluid level

indicator

Angle selection

Language setting

Pressure

failed

reach

pressurizing, system will report E1.

Possible fault: No fuel; pump failure; pipeline

problem etc.

The machine tilts over 45° , it stops running,

system will report E6

Machine stops running due to battery voltage

higher than15V or lower than 10V for 5s

contentiously.

Possible fault: the battery is low.

Safety lock located at TEST MODE

Pressure relief error due to pipeline can't release

pressure.

Possible fault: pressure release valve failure;

pipeline problem or control system problem etc.

- 7 -

ON/OFF

Full

105 ， Left 90 ， Left

75 ， Left 60 ， Left

45 ， Left 30 ， Left

15 ，middle 0，right

15 ， right 30 ， right

45 ， right 60 ， right

75 ， right 90 ， right

105

100%

after

13s

Angle ， Left