DK2 Power OPC503 Manual de montagem - Página 12
Procurar online ou descarregar pdf Manual de montagem para Trituradores DK2 Power OPC503. DK2 Power OPC503 13 páginas. Chipper shredder top loading
Também para DK2 Power OPC503: Manual de montagem (15 páginas), Manual de instruções (14 páginas), Manual de instalação (20 páginas)
Imprimir página
QUICK START AND TROUBLE SHOOTING GUIDE
QUICK START SETUP
•
ADD 10W30 OIL TO ENGINE
•
ADD GAS
•
PIN BOTH WHEELS INTO PIVOT BRAKE HOLES.
•
TURN KEY ON
•
HALF THROTTLE (CHOKE OPTIONAL FOR COLD STARTS)
•
PULL START THE ENGINE
TREE CHIPPING
•
ENGINE ON HIGHEST SPEED
•
FEED SMALLER TREES INTO CHUTE AND LET GO, TREE WILL AUTO FEED.
•
FEED LARGER TREES SLOWLY ALLOW CUTTER WHEEL TO REGAIN RPM SPEED
BETWEEN CUTS.
•
FEED LEAVES, TWIGS AND UPTO 1 INCH DIA TREES INTO TOP HOPPER.
TROUBLE SHOOTING
• ENGINE WONT START
•
TURN KEY ON – CHECK ENGINE OIL LEVEL - CHECK GAS LEVEL
•
UNPLUG KEY SWITCH – IF ENGINE STARTS REPLACE THE KEY SWITCH.
•
FOLLOW YOUR ENGINE MANUAL FOR FURTHER TROUBLE SHOOTING.
• UNIT VIBRATES
•
CHECK YOUR CHIPPER FOR MISSING OR LOOSE BLADES.
•
CHECK YOUR CHIPPER WHEEL IS NOT OBSTRUCTED AND FREELY TURNS.