DK2 Power OPC503 Руководство по сборке - Страница 12
Просмотреть онлайн или скачать pdf Руководство по сборке для Дробилки/измельчители DK2 Power OPC503. DK2 Power OPC503 13 страниц. Chipper shredder top loading
Также для DK2 Power OPC503: Руководство по сборке (15 страниц), Руководство по эксплуатации (14 страниц), Руководство по установке (20 страниц)
Печатать страницу
QUICK START AND TROUBLE SHOOTING GUIDE
QUICK START SETUP
•
ADD 10W30 OIL TO ENGINE
•
ADD GAS
•
PIN BOTH WHEELS INTO PIVOT BRAKE HOLES.
•
TURN KEY ON
•
HALF THROTTLE (CHOKE OPTIONAL FOR COLD STARTS)
•
PULL START THE ENGINE
TREE CHIPPING
•
ENGINE ON HIGHEST SPEED
•
FEED SMALLER TREES INTO CHUTE AND LET GO, TREE WILL AUTO FEED.
•
FEED LARGER TREES SLOWLY ALLOW CUTTER WHEEL TO REGAIN RPM SPEED
BETWEEN CUTS.
•
FEED LEAVES, TWIGS AND UPTO 1 INCH DIA TREES INTO TOP HOPPER.
TROUBLE SHOOTING
• ENGINE WONT START
•
TURN KEY ON – CHECK ENGINE OIL LEVEL - CHECK GAS LEVEL
•
UNPLUG KEY SWITCH – IF ENGINE STARTS REPLACE THE KEY SWITCH.
•
FOLLOW YOUR ENGINE MANUAL FOR FURTHER TROUBLE SHOOTING.
• UNIT VIBRATES
•
CHECK YOUR CHIPPER FOR MISSING OR LOOSE BLADES.
•
CHECK YOUR CHIPPER WHEEL IS NOT OBSTRUCTED AND FREELY TURNS.