Customidea GeoPic II Manual de instruções - Página 5
Procurar online ou descarregar pdf Manual de instruções para Acessórios para câmaras Customidea GeoPic II. Customidea GeoPic II 20 páginas. Geotagging device for nikon d200/d2hs/d2x/d2xs fuji s5 pro
Imprimir páginaGeoPic II overview
The GeoPic II is designed to be extremely compact and
very simple to use, so you can spend time on your
photography instead of being confused by a new gadget.
A function button is used
along with your camera
shutter release button to
access all of the GeoPic II
features. A multicoloured
light indicates the current
state of the system. The
GeoPic II simply slots into
the flash mount on your
camera and connection is
achieved through a high
quality 10-pin lead.
The GeoPic II has three modes of operation, which are
explained in detail in later sections:
Mode:
Power: Colour: Description
Continuous Short
battery
life
Low Power
Long
battery
life
Super
Freeze
long
battery
life
†
Super low power if set to send GPS data when shutter release button is half pressed
Nikon D200, D2HS, D2X and D2XS and Fuji S5 Pro are registered
trademarks or a trademark of their respective companies.
Red
Green
Blue
†
4
GeoPic II continuously sends GPS
location to the camera if locked to the
satellites. Camera never leaves
metering state.
GeoPic II only sends GPS location to
the camera if locked to the satellites
AND shutter release button is half
pressed. Camera can leave metering
state.
GeoPic II freezes the GPS location, on
demand, in an internal buffer and uses
this data to send to the camera. Can
select to send GPS location to camera
when shutter release button is half
pressed, or continuously as required.
GeoPic II overview