Aluprof AL-BR01 Manual de instalação, montagem e funcionamento - Página 3

Procurar online ou descarregar pdf Manual de instalação, montagem e funcionamento para Unidade de controlo Aluprof AL-BR01. Aluprof AL-BR01 4 páginas. Gate control unit

Imprimir página

5. Control unit programming.

5.1. Programming the first transmitter.

With the power on, press the

PROG button or 3x the button

connected to inputs 13 and

14 which will be confirmed by

lighting of the A LED.

* - In case of lack of ‚'P2'' button its function is performed by a combination of "STOP" and "UP" buttons.

5.2. Adding another transmitter.

Press the „P2" * button twice

of the already programmed

transmitter

* - In case of lack of ‚'P2'' button its function is performed by a combination of "STOP" and "UP" buttons.

5.3. Deleting the transmitter.

Press the „P2" button*

* - In case of lack of ‚'P2'' button its function is performed by a combination of "STOP" and "UP" buttons.

5.4. Return to factory settings.

Returning to factory settings deletes all the transmitters programmed in the control unit.

With the power on, press the

PROG button 7x

We reserve the right to any technical change.

Valid on 2019.11.18

Correct programming of the

transmitter will be confirmed by

Within 10 seconds press the

lighting of the LED B and short

„P2" button *

supply of voltage to outputs

Press the "P2" * button of the

confirmed by lighting of the

LED B and short voltage supply

new transmitter

Press the „STOP" button

Each button press will be

procedure will be confirmed by

confirmed by lighting LED A

5 and 6

Each button press will be

to outputs 5 and 6

Each button press will be

confirmed by lighting of the

Press the „P2" button*

LED B and short voltage supply

Successfully completed

lighting of LED A, LED B

to outputs 5 and 6