3M 710 Manual de instruções - Página 7

Procurar online ou descarregar pdf Manual de instruções para Projetor 3M 710. 3M 710 20 páginas. Splicing rig
Também para 3M 710: Brochura e especificações (4 páginas), Especificações (4 páginas)

Imprimir página

3.5 Position the error tester tool over the index strip, left

for tips (A), right for rings (B). Correct any errors if

found.

3.6 Spread the conductors around the "T" bar. Pull the

"T" bar up above the index strip between the vertical

side posts.

3.7 Push the "T" bar forward and down until contact is

made with the conductors. Pull the handle down to

the stop, seating and cutting the conductors in the

index strip. Remove the excess conductors. Engage

the handle into the retaining clip, pull the "T" bar

up, and place into the open position.

3.8 Insert module body over the index strip with the

cathedral windows of the module body facing the

color code guide. Use finger pressure to push down

on the body to pre-engage it with the index strip.

Pull the "T" bar above the module body. Push it

forward and down until contact is made with the

body, pull the handle down to the stop, seating the

body to the index strip. Engage the handle into the

retaining clip, pull the "T" bar up, and place into the

open position.

78-815-304--E