Blue Angel BSPF Manual de instruções e de peças

Procurar online ou descarregar pdf Manual de instruções e de peças para Bomba de água Blue Angel BSPF. Blue Angel BSPF 4 páginas. Submersible sump pump

Imprimir página

Operating Instructions and Parts Manual

Description

This submersible pump is designed for

home sump applications. The unit is

equipped with an 8-ft long, 3-prong

grounding type power cord. Motor is

oil filled and sealed for cooler running

and designed to operate under water.

A float switch is provided for automatic

pump operation. This pump is not

suitable for aquatic life.

Unpacking

Inspect this unit before it is used.

Occasionally, products are damaged

during shipment. If the pump or

components are damaged, return

the unit to the place of purchase for

replacement. Failure to do so could

result in serious injury or death.

READ & FOLLOW ALL INSTRUCTIONS

SAVE THESE INSTRUCTIONS

DO NOT DISCARD

Safety Guidelines

This manual contains information that is

very important to know and understand.

This information is provided for SAFETY

and to PREVENT EQUIPMENT PROBLEMS.

To help recognize this information,

observe the following symbols:

Danger indicates an

imminently

hazardous situation which, if not avoided,

WILL result in death or serious injury.

Warning indicates a

potentially

hazardous situation which, if not avoided,

COULD result in death or serious injury.

Caution indicates a

potentially

hazardous situation which, if not avoided,

MAY result in minor or moderate injury.

Notice indicates

important

information, that if not followed, may

cause damage to equipment.

NOTE: Information that requires special

attention.

Please read and save these instructions. Read carefully before attempting to assemble, install,

operate or maintain the product described. Protect yourself and others by observing all safety

information. Failure to comply with instructions could result in personal injury and/or property

damage! Retain instructions for future reference.

Submersible Sump Pump

General Safety Information

CALIFORNIA PROPOSITION 65

contain chemicals, including lead, known

to the State of California to cause cancer

and birth defects or other reproductive

harm. Wash hands after handling.

GENERAL SAFETY INFORMATION

pump ﬂ ammable or explosive

ﬂ uids such as gasoline, fuel

oil, kerosene, etc. Do not

use in a ﬂ ammable and/or explosive

atmosphere. Pump should only be used

to pump clear water. Personal injury

and/or property damage could result.

salt water, brine, laundry discharge

or any other application which may

contain caustic chemicals and/or foreign

materials. Pump damage could occur if

used in these applications and will void

warranty.

Specifications

Power supply requirements

Motor

Horsepower

1/3 HP

1/2 HP

Liquid temperature range

Circuit requirements

Dimensions

Cut-in level (factory set)

Cut-out level (factory set)

Construction

Motor housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Cold rolled steel;

Volute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cast iron (BCS); Thermoplastic (BSPF)

Impeller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Glass reinforced thermoplastic

Shaft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Low carbon steel

Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Buna N

Discharge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1/2 in. NPT

Motor cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Glass reinforced thermoplastic

REMINDER: Keep your dated proof of purchase for warranty purposes!

Attach it to this manual or file it for safekeeping.

For parts, product & service information

visit www.blueangelpumps.com

BCS, BSPF, and SSBCS Series

qualiﬁ ed electrician.

This product or

its power cord may

on the ﬂ oor, do not walk on wet area

until all power is turned off. If the shutoff

box is in the basement, call an electrician.

Remove pump and either repair or replace.

Failure to follow this warning could result

in fatal electrical shock.

Do not

use to

1-888-636-6628 for backup model number.

Installation

1. Install pump in a sump pit with

This pump is not

designed to handle

2. The unit should be located and

120V, 60 Hz

Single phase, oil filled

(BSPF33, BCS33, BCS33HH, SSBCS33,

SSBCSF33)

(BCS50-2, BCS50, BSPF50, SSBCSF50-2,

SSBCS50)

40°F to 120°F

15 amps (min)

11-1/2 in. high x 9-3/4 in. base

9 in.

4 in.

All wiring must be

performed by a

If the basement has

water or moisture

A backup system

should be used. Call

minimum size as shown in Figure 1

below. Construct sump pit of tile,

concrete, steel or plastic.

rest on a solid, level foundation.

Do not place pump directly on clay,

earth, gravel or sandy surface. These

surfaces contain small stones, gravel,

sand, etc. that may clog or damage

the pump and cause pump failure.

Stainless steel (SSBCS series)

350307-002 1/10