Akoma Pet Products Heat-N-Breeze Manual - Página 2

Procurar online ou descarregar pdf Manual para Aquecedor Akoma Pet Products Heat-N-Breeze. Akoma Pet Products Heat-N-Breeze 5 páginas.

ELECTRICAL SAFETY INFORMATION

This heater is for use with 120 volts.

The cord has a plug as shown at A in the diagram.

An adapter as shown at C is available for

connecting three-blade grounding-type plugs to

two-slot receptacles.

The green grounding plug extending from the

adapter must be connected to a permanent

ground such as a properly grounded outlet box.

The adapter should not be used if a three-slot

grounded receptacle is available.

If an extension cord is used, it needs to be a minimum of 18 gauge wires and

it must have a 3 prong grounded plug end. Make sure the connections are

elevated off the ground, and are not able to come in contact with water, and

plugged into a GFCI outlet.

OPERATING INSTRUCTIONS

The Heat-N-Breeze must be properly installed before it is used.

Set the thermostat to the desired temperature in the pet house. By turning the

thermostat knob clockwise, this will increase the temperature setting of the Heat-N-

Breeze. When you turn the thermostat clockwise you will hear a faint click. The

unit will turn on and run at maximum power until that chosen temperature is

reached.

Approximate settings are as follows:

LOW - MEDIUM is approximately 35F-50F (1C - 10C)

MEDIUM - HIGH is approximately 50F-80F (10C - 26C)

The Hound Heater™ pet house furnace is powered by a long lasting 300 watt

heating element.

Because all pet houses are different sizes, shapes, insulation values,

with varying outside temperatures, etc., reaching the desired

temperature will vary greatly. It is EXTREMELY important that your pet

house be insulated and preferably have a door/flap.