Fleetwood WRS970 Manual do utilizador - Página 10
Procurar online ou descarregar pdf Manual do utilizador para Teclado Fleetwood WRS970. Fleetwood WRS970 20 páginas. Reply system keypad and base station
Imprimir páginaPreliminary Document
4.10.1 Page 1: Serial Number
Σ ε ρ ι α λ #
1 2 3 Α Β Χ
The factory set serial number is displayed. It will
match the number printed on the label on the bottom
of the keypad and cannot be changed.
4.10.2 Page 2: Firmware Revision
Φ ι ρ μ ω α ρ ε
1 . 0 0
Selecting the firmware menu displays the current
firmware revision loaded in the keypad. Since the
product is field updatable, this is a useful tool for
knowing whether the keypad is up-to-date.
4.10.3 Page 3: LCD Contrast
Χ ο ν τ ρ α σ τ
−
1
The contrast is a setting that can be changed and may
need to be as the batteries begin to die. Pressing the
right and left soft keys will increase and decrease
respectively the contrast level.
4.10.4 Page 4: Static Keypad Address
Α δ δ ρ ε σ σ
0 0 2
The current address of the keypad is displayed on the
second line. This menu option is only for Static
mode keypads. Enter the three digits, up to 500, that
the keypad will become. As each key is entered, the
previous will shift left a position on the display.
Once the desired address is shown, press the SEND
key to save or the DEL key to exit and not save. If an
invalid address is entered and SEND is pressed, the
keypad will report Invalid and the address will not
save.
4.10.5 Page 5: Static Keypad Base ID(CH)
Β α σ ε Ι Δ
1 0
+
This option works similarly to the Keypad
page. En
ter two digits of the Base ID, up
the base
unit the keypad is to commun
Press the
SEND key to save or the DE
cancel. Th
is option, like the keypad ad
for static m
ode keypads.
4.10.6 Page 6: Key Press Feedback
Κ ε ψ Β ε ε π
Ο ν
Each keypad contains a buzzer internal
the optio
n of being configured to provid
with each
key that is pressed. Using the left and
soft keys, t
he option can be turned on or
the SEND
key to accept or the DEL key to
4.10.7 Page 7: Keypad Addressing Mode
Μ ο δ ε
Σ τ α τ Δ ψ ν α
The keypad can be configured to Stati
Dynamic mode. Use the left and right s
selecting an
d the SEND key to save. Pres
key to ca
ncel and exit. Once the mode
changed, t
he keypad must be powered dow
on to oper
ate in the new mode. See secti
more information about the two modes.
4.11 Changing the Batteries
Each keypad is powered from 2 x "AA" batteries.
Fleetwood recommends using alkaline batteries, but
rechargeable NiMH batteries work giving a shorter
life. In order to use rechargeable batter
p
arty charger must be used since the keypads are not
rechargeable. One fresh set of
last for up to 150 hours of use.
To change the batteries, remove the security screw.
Press the side tabs of the battery lid shown below.
address
to 31, for
icate with.
L key to
dress, is only
Ο φ φ
ly which has
e feedback
right
off. Press
cancel.
c mode or
oft key for
s the DEL
has been
n and back
on 5.1 for
ies, a third
alkaline batteries can
9