Fleetwood WRS970 Manual do utilizador - Página 8

Procurar online ou descarregar pdf Manual do utilizador para Teclado Fleetwood WRS970. Fleetwood WRS970 20 páginas. Reply system keypad and base station

Imprimir página
Preliminary Document

3.4.1 USB

For the first USB connection, internet access is
recommended for obtaining drivers. If internet is not
available, insert the Hardware Manual CD that came
with the WRS970 Base Station.
The USB connection is capable of powering the base
unit along with the data connection. Connect the
included USB cable to the base and the other end to
an open USB port on the PC or hub. The drivers will
install automatically and the PC alerts when the
hardware is installed and ready to use.

3.4.2 Ethernet

An Ethernet connection is provided for installations
where the Base Station may not be within a USB
cable length of the PC. To connect directly to the
PC, an Ethernet cross-over cable must be used. For
connection through a hub or similar device, a
standard Ethernet cable can be used.
Ethernet, the optional accessory kit for Ethernet
connectivity is available which includes the AC-DC
adaptor and standard Ethernet cable.
As an alternate to the DC supply, the WRS970 Base
unit can also be powered using Power-over-Ethernet
(PoE) MIDSPAN. An optional PoE accessory kit is
also available which includes a power injector and
Ethernet cable. PoE is a technology that supplies
power and data through the one Ethernet cable. For
single base installations, a product called a PoE
Injector connects between the PC and the Base
stations near a power source (Figure 1). For multiple
base installations, a PoE Midspan hub, router or
switch can be used.
Data
PoE
Computer
Injector
Power
Figure 1 PoE Midspan Connection
Each base unit ships from the Fleetwood factory with
a default IP address of 200.0.0.111, subnet mask of
255.255.255.0 and port 2101.
desired connection type, these settings can be
changed. See appendix x for instructions.
To use
Power & Data
Base
If Ethernet is the
Important! After connecting power to the base unit
for use with Ethernet, the base unit requires a 30
second wait period before the software application
can connect via Ethernet.
3.5 Software
®
Activate the Reply
WRS970 compliant software
application. Connect to the Base Station (see your
software manual for further instructions) and start a
polling session. The system is now ready to process
responses from assigned keypads. Two-way radio
communication is now operational between the Base
Station and keypads.

4.0 How to Use the Keypad

The keypad independent of a base unit does not
provide much functionality.
Any of the keys listed below can be disabled via the
software to further limit invalid key presses.

4.1 Power Key

The power key will turn on and off the keypad. The
base unit can control whether the key is disabled to
turn off the keypad.

4.2 Base Key

7