100FIT 50T Manual de instruções - Página 11

Procurar online ou descarregar pdf Manual de instruções para Passadeira de corrida 100FIT 50T. 100FIT 50T 16 páginas.

Imprimir página

COMPUTER INSTRUCTION

Remote button function:

1. „□" is start / stop button: This button can be used to stop the treadmill from running state and

reset to zero during exercise. Press this button also as the start button when the power is on

and the safety lock in its position.

2. „+" is speed increasing button: Adjust the speed after the treadmill starts, its adjustment range

is 0.1 km/time, and it continues to increase when it is held for more than 1 second.

3. „-" is speed decreasing button: Adjust the speed after the treadmill starts, the adjustment range is

0.1 km/time, and continue to decrease when it is held for more than 1 second.

II. Speed Display range:

Setting parameters

Time (MIN: SEC)

Incline（%）

Speed（KM/H）

Distance(KM)

Heart rate(/MIN)

Calorie(Kcal)

VI.

Treadmill Shut down instructions:

The treadmill can be turned off at any time by turning off the power switch so that it does not

damage the treadmill.

VII.

Walk and running mode change:

When pulling up the treadmill handrail, safety lock in its position , the treadmill speed

range is 1.0-12 KM. It is the running mode.

When pulling down the treadmill handrail, take down the safety lock, the treadmill speed

range is 1.0-6.0 KM. It is the walk mode..

VIII.

Error:

E01

Communication error

E02

Motor overvoltage protection

E08

Loss of speed signal

E04

Motor open-circuit

R05

Overcurrent protection

E07

Safety switch off

Start

Default

0:00

0.8

1.0

0.00

N/A

0.0

Setting range

0.8-8.8

N/A

Display Range

0:00－99:59

0.8-8.8

0.00－99.90

0.0－999.0