100FIT 50T Інструкція з експлуатації - Сторінка 11
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Бігова доріжка 100FIT 50T. 100FIT 50T 16 сторінок.
Друкувати сторінкуCOMPUTER INSTRUCTION
Remote button function:
1. „□" is start / stop button: This button can be used to stop the treadmill from running state and
reset to zero during exercise. Press this button also as the start button when the power is on
and the safety lock in its position.
2. „+" is speed increasing button: Adjust the speed after the treadmill starts, its adjustment range
is 0.1 km/time, and it continues to increase when it is held for more than 1 second.
3. „-" is speed decreasing button: Adjust the speed after the treadmill starts, the adjustment range is
0.1 km/time, and continue to decrease when it is held for more than 1 second.
II. Speed Display range:
Setting parameters
Time (MIN: SEC)
Incline（%）
Speed（KM/H）
Distance(KM)
Heart rate(/MIN)
Calorie(Kcal)
VI.
Treadmill Shut down instructions:
The treadmill can be turned off at any time by turning off the power switch so that it does not
damage the treadmill.
VII.
Walk and running mode change:
When pulling up the treadmill handrail, safety lock in its position , the treadmill speed
range is 1.0-12 KM. It is the running mode.
When pulling down the treadmill handrail, take down the safety lock, the treadmill speed
range is 1.0-6.0 KM. It is the walk mode..
VIII.
Error:
E01
Communication error
E02
Motor overvoltage protection
E08
Loss of speed signal
E04
Motor open-circuit
R05
Overcurrent protection
E07
Safety switch off
Start
Default
0:00
-
-
-
0.8
1.0
0.00
-
-
N/A
0.0
-
Setting range
-
-
0.8-8.8
-
N/A
-
Display Range
0:00－99:59
-
0.8-8.8
0.00－99.90
-
0.0－999.0