DOEPFER A-190-2 Manual

Procurar online ou descarregar pdf Manual para Sintetizador DOEPFER A-190-2. DOEPFER A-190-2 13 páginas.

DOEPFER

Fig. 1: Schematics

System A-100

1. Introduction

Module A-190-2 is an economically priced alternative to the

Midi-CV/SYNC interface A-190-1. It can be used in all cases

where the additional features of the A-190-1 are not

required (e.g. clock output, start/stop output). A-190-2 is the

modular version of the MCV4 interface.

These are the most important features of the A-190-2:

•

Midi-to-CV/Gate interface

•

Gate output 0/+5V

•

CV1: voltage derived from incoming Midi note

messages (0...+5V / 5 octaves), the glide control

affects this CV output

•

CV2: voltage derived from incoming Midi pitch bend

messages (-2.5 ... +2.5V)

•

CV3: voltage derived from the multiplication of

incoming Midi volume messages and the velocity

data of the note messages (0...+5V)

•

CV4: voltage derived from a freely adjustable Midi

control change message (0...+5V)

•

Midi channel, reference note for 0V CV1 and the

midi control change number for CV4 are adjusted by

means of the learn button.

•

Glide control: portamento/slew limiter function for

CV1

By means of two jumpers CV1 and Gate can be connected

to the corresponding lines of the A-100 bus.

Midi-to-CV/Gate A-190-2